Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by
following these hints, consult your dealer or service center.
following these hints, consult your dealer or service center.
WARNING:
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate the
Under no circumstances should you try to repair the set yourself, as this will invalidate the
warranty.
warranty.
PROBLEM
– POSSIBLE CAUSE
• REMEDY
No sound
– Volume not adjusted
• Adjust VOLUME
AM broadcast cannot be received properly
– Weak radio signal
• Rotate the set for better reception and make sure that the
set is placed on a suitable (non-metallic) surface.
Continuous crackling and hiss noise during AM
reception
– Interference from other electrical equipment e.g. TVs,
computers, fluorescent lamps
• Move the clock radio away from electrical equipment
Intermittent crackling sound during FM reception
– Weak signal
• Adjust the built-in power cord antenna
The alarm does not function
– The alarm is not set
• Set the alarm time and the alarm switch to BUZZER or
RADIO
– Volume too low for radio
• Increase the volume
SLEEP does not function
– Radio still in ON position
• Switch RADIO to OFF
– Clock control in SET TIME or SET ALARM position
• Adjust clock control to CLOCK
TROUBLESHOOTING
11
Publicidad
Tabla de contenido
Solución de problemas
