I.SOUND BT-150 Guía De Usuario página 5

2. Plug the USB A end of the cable into a powered
USB port, such as a computer, laptop, or USB AC
adapter (not included).
3. The LED indicator located on the control box will
glow red. Once the headset is fully charged, the LED
power indicator will turn o .
NOTES:
• The LED indicator will light up red while charging
even if the BT-150 is o .
• You cannot charge your BT-150 while listening
to music.
Connecting via Bluetooth ( rst time
set-up)
NOTE: Adjust the volume of your device and the
BT-150 to a comfortable volume before use.
1. Move the power switch on the side of the BT-150
to the "ON" position. The LED indicator light on the
control box will ash blue.
2. Open the se ings on your Bluetooth device
(Bluetooth must be enabled).
3. Select "BT-150" om the list of Bluetooth devices.
4. Once paired, the LED indicator light will ash blue
slowly.
5. To turn o the BT-150, move the power switch on
the side to the "OFF" position.