Warning - AXXAIR SATF-40NDHX Modo De Empleo

INNOVATIVE ORBITAL SOLUTIONS
Arc-welding can be dangerous for the operator as well as for all persons in the vicinity. Take all
appropriate safety precautions before using the welding machine. Observe and obey the safety
procedures imposed by your employer; these procedures should be based on the rules and
regulations in force as well as on the manufacturer's recommendations.
Electric Shock = Potential loss of life.

Install and earth the welding equipment, following the rules and regulations in force.

Do not touch live parts. Do not touch electrodes with bare hands or wet gloves.

Insulate yourself from the ground and from the workpiece.

Ensure that the work position adopted is safe both for the operator and for persons nearby.
Fumes and gas = Potential health hazard:

Keep your face as far away from welding fumes as possible.

Provide ventilation and evacuation of welding fumes using a suitable device that provides a
safe working environment.
Light rays from the arc = These can damage your eyes and burn your skin.

Protect your eyes and skin. Use a protective visor and wear safety clothing and protective
gloves.

Protect nearby persons from injury due to welding by providing protective curtains.
In the event of a malfunction, contact qualified service personnel only.
General Safety Instructions : ....................................................................................................................... 15
Warning: ...................................................................................................................................................... 16
1. Declaration of conformity: ................................................................................................................... 17
2. Presentation: ....................................................................................................................................... 17
3. Machine handling and storage: ........................................................................................................... 17
Handling: ................................................................................................................................................ 17
Storage: .................................................................................................................................................. 17
Bench mounting: .................................................................................................................................... 17
4. Connecting the weld head: ................................................................................................................. 18
5. Mounting the clamping jaw: ................................................................................................................ 19
6. Keypad ................................................................................................................................................ 20
7. Electrode mounting: ............................................................................................................................ 20
8. Remote pipe-electrode adjustment: .................................................................................................... 21
9. Securing the pipe to be welded: ......................................................................................................... 23
10. Welding step-by-step: ......................................................................................................................... 23
Preparing to weld: .................................................................................................................................. 23
............................................................................................................................................................... 24
11. Handling the pipe: ............................................................................................................................... 24
Welding: ................................................................................................................................................. 24
............................................................................................................................................................... 25
12. Welding settings:................................................................................................................................. 25
13. Welding machine maintenance: .......................................................................................................... 25
Bedienungsanleitung : ............................................................................................................................ 26
Join experience

Warning:

Contents
SAS au capital de 135 720 € - RCS Romans B414 581 363 - Code APE 2841 Z - Siret 414 581 363 00028 - TVA FR13414 581 363
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 16 -
English