Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be collected
separately and handed in for environmentally
compatible recycling.
13. Technical Specifications
Explanatory notes on the information on page 3.
Changes due to technological progress reserved.
P
= rated input
1
P
= rated output
2
n
= no-load speed
1
n
= load speed
2
ø max = max. solid drill diameter
s max = max. impact rate
W
= single impact energy
m
= weight
D
= spindle collar diameter
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
= Vibration emission value
h, HD
(hammer drilling into concrete)
a
= Vibration emission value
h, Cheq
(chiselling)
K
=Unsafe (vibration)
h,HD/Cheq
Typical A-effective perceived sound levels:
L
= Sound pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
Wear ear protectors!
ENGLISH en
9
Publicidad
Tabla de contenido
