Descargar Imprimir esta página

9circle CT9 Manual De Usuario página 14

Publicidad

27. Turn on the regulator for air pressure from the 2L container and then turn on the motor of the
2L container.
27. Abra el regulador para llenado desde el tanque de 2 litros y encienda el motor del tanque de
2 litros.
27
28
29
30
31. Once finish draining the entire oil, do the regular oil change procedure, then the job is done.
31. Una vez termine de drenar el aceite por completo, siga el procedimiento regular para el cambio
de aceite. Y el trabajo es terminado.
®
1
28. Remaining oil in the 2L tank will help
to clean out the rest of the dirty oil from
the vehicle.
28. Aceite restante en el tanque de 2
litros, va a terminar de drenar el resto del
aceite viejo dentro del vehículo.
29. Turn on air suction regulator from the
12L glass.
29. Abra el regulador para succión del
tanque de 12 litros.
30. Connect hook adapter into the oil pan's
drain hole, connect the black hose to the
hook adapter and turn on its valve, then
turn on the vacuum regulator to finish
suctioning the oil that remains in the oil
pan that could not been drained out
naturally (this depends on the oil pan
construction).
30. Conecte el adaptador de gancho en el
orificio de drenaje del cárter, conéctele la
manguera negra y abra su válvula,
después abra el regulador de succión para
terminar de succionar el aceite que no fue
posible drenar desde el cárter por sí solo.
13
EN / ES
2

Publicidad

loading

Productos relacionados para 9circle CT9

Este manual también es adecuado para:

9cl-65629