Inateck BR1006 Manual De Instrucciones página 6

Note:
a. BR1006 will enter pairing mode automatically when powered on for
the first time.
b. BR1006 can only automatically re-pair to the 4 most recently
connected devices.
2. Pair with two devices at the same time
In TX mode, BR1006 is able to pair with two Bluetooth stereo earphones/
speakers at the same time. And both can play music at the same time.
1) Follow the previous instructions in the "Pairing" section to pair
the BR1006 with your first device. Turn off your first device after
successfully pairing it with the BR1006.
2) Tap the Multifunction Button twice to pair and connect to your
second device. Turn off the BR1006 after successfully pairing it with
your second device.
3) Turn on your first device and wait for 10 to 20 seconds. Both of your
devices are now ready for pairing. Turn on the BR1006, the devices
will automatically connect in. The BR1006 LED indicator will turn solid
green.
Note:
a. Please turn off the BR1006 and restart it to re-pair if two devices
cannot play music at the same time. If the problem still exists after
repeating the whole steps above, please contact Inateck Support at:
support@inateck.com.
b. It is advised to switch off the Bluetooth function of your other devices
to avoid signal interference.
c. We have performed the compatibility testing with various Bluetooth
chipsets on the market. But please note not all these chipsets use
the same software, compatibility issue might still encounter for some
Bluetooth devices. Please contact our customer support team for
help.
d. BR1006 can automatically re-pair to the 2 most recently connected
devices.
5