Connecting To The Mains; Operating Instructions; Purpose Of Use; Instructions For Use - Fieldmann FVC 4001-EK Manual Del Usuario

EN 6 Putting into operation | Operating instructions
Ensure that the distance between the switching fl oat and the pawl holder is not too small. It is
not possible to guarantee correct operation when the gap is too small.
As soon as you set the switching fl oat, check that it is not touching the underlay before the
pump turns off.
The activity position of the switching fl oat can be set by adjusting the fl oat in the holder of the
pawl.
ATTENTION! Danger of running when empty.
Note: The tank for the pump should have the minimum dimensions of 40 × 40 × 50 cm
(height × width × depth), for the fl oat to freely move with the switch.

Connecting to the mains

Your new submersible pump is equipped with a power plug, preventing discharge, meeting strict
norms. The pump is designed to be connected to a safety power socket 230 V ~ 50 Hz. Check
that it is in perfect condition. Insert the plug into the socket and the pump is ready for use.
ATTENTION! If the power cord or power plug are in any way damaged by an external
action, do not repair the power cord and contact an authorised service centre!
ATTENTION! This repair should only be performed by an authorised service centre.

4. OPERATING INSTRUCTIONS

Purpose of use

This pump may be used anywhere, where you wish to transfer water from one location to
another, e.g. at home, agriculture, gardening, plumbing and for many other applications.
This product is designed for private household use.
It is not suitable for professional use.
The submersible pump is suitable for work with water in a water distribution system and for
chlorinated pool water.
It is not suitable for work with waste water in sewage systems, salt water, aggressive or easily
combustible substances, for work in food processing or as a pump for water jets on garden
ponds.
It is not designed for pumping drinking water!

Instructions for use

ATTENTION! Before setting up the machine or carrying out maintenance on the machine,
or if the electric power cable has become jammed or is damaged, always disconnect it from
the electric power socket!
Note: Before using the submersible pump, please fi rst carefully read all the safety
FVC 4001-EK / FVC 4002-EK