Operating Data; Electric Data - LEGRAND IME CONTO D4-Pt Manual Del Usario

Energy meter on CT/5A,
MID indirect connection
5. CONNECTIONS
Wiring diagrams:
F:0,5A gG
L1
L2
L3
Connection on VT:
8
2 5 11
F:0,5A gG
L1
L2
L3
N
(3N-3E)
Technical data sheet: IDP000192EN_01
3-2E
(2-3)
2 5 8 11
L1 L2 L3
1 3 4 6 7 9
2 5
F:0,5A gG
L1
L2
L3
(3-3E)
Codes: CE4TBDTMID – CE4TBMTMID
Model: CONTO D4-Pt

6. OPERATING DATA

6.1 ELECTRIC DATA

Currents:
- Minimum measurement current: 0,05-5(6)A
Rated voltages:
- Three-phase rated voltage Un:
3x100...3x400V, 3x100/173...3x230/400V
Frequenza nominale:
- F : 50Hz; 60Hz
n
- Variazione ammessa: 49...51Hz; 59...61Hz
Rated frequency:
- F : 50Hz; 60Hz
n
- Permitted variation: 49...51Hz; 59...61Hz
Connectable section:
- Copper wires
- Voltage connection terminals (V1, V2, V3, N)
- Current connection terminals(L1, L2, L3)
Rigid wire
Flexible wire
- Terminal boards in the upper part of the meter (RS485, bus):
8
Rigid wire
Flexible wire
Utensili necessari:
- For all measuring terminals: screwdriver with 6mm blade or
Pozidriv No. 2
- For the terminal boards in the upper part of the meter (input, and
bus): screws with 2.5mm blade
Updated: -
(continues)
Without bush With bush
1 x 1,5 ÷ 16 mm²
1 x 1,5 ÷ 10 mm² 1 x 4 ÷ 10 mm²
Without bush With bush
1 x 0,2 ÷ 1,5 mm²
1 x 0,2 ÷ 1 mm² 1 x 0,2 ÷ 1 mm²
Created: 19/03/2019
-
-
3 | 8