Clipping With Comb Attachment - Philips QC5560 Manual De Usuario

ENGLISH
6

Clipping with comb attachment

1 Put the small plug in the appliance and put the adapter in the
wall socket.
2 Attach the comb attachment to the swivel head ('click').
Make sure that the comb attachment locks into position properly.
3 Turn the length setting adjustment ring to set the comb attachment
to the desired setting (1-7).
The arrowhead on the appliance indicates which setting you have
,
selected.
Note: The length settings are indicated on the comb attachment.
Tip: Use different settings to create a natural and smooth transition between
the various hair lengths from your neckline to the top of your head.
Do not turn the length setting adjustment ring beyond the
highest setting.
4 Turn the swivel head to the position that is most comfortable for
your arm when you clip the different parts of your head.
Using the swivel head
- From its starting position of 0° (pointing forwards), you can turn the
swivel head 45° or 90° to the left or right. This enables you to adjust
the position of the cutting element to the part of your head that you
are clipping. This makes it much easier to clip your own hair.
- To set the cutting element to the desired position, turn the swivel
head ('click').
Note: Always adjust the position of the cutting element by turning the swivel
head. Do not turn the swivel head by holding the cutting element or the comb
attachment.
Note: Do not turn the swivel head more than 90° to the left or right.