Sartorius YDO05FC-X Instrucciones De Instalación página 4

Pull out the main PCB (8).
Disconnect both cables (9).
Remove the adapter housing (7) with the corresponding cables/connectors (9).
Remove both jumpers from the main PCB (8).
Position the data output card (4) on the main PCB (8) and fasten it with the screw and
washer (5) provided.
Pull the data output cable (2) out through the opening and fasten the adapter housing
(1) with the screws (10) provided.
Slide the main PCB (8) back into its slot.
Connect the power supply cable (3) to the main PCB (8).
Connect the data output cable (2) to the data output card (4).
4