Listen To Radio - Panacom BB-2000 Manual Del Usuario

CONNECT TO AUX IN
1. Put one terminal of the signal input cable into the AUX IN Jack and the other
into the output jack of the external audio device(PC, MOBILE, IPAD, CD player,
etc.)
2. Set the function switch to RADIO position, the LCD will show letter of "AUX" ,
it will play music from the connected device, adjust the VOLUME control for a
preferred sound volume.
3. When the unit connected with external audio device by AUX in, it will only
support AUX in playing, and can not shift to other playing mode by function
switch.

LISTEN TO RADIO

- Set the FUNCTION switch on RADIO position. The FM led wil light on and
the LCD will show the letters "FM" and the latest played frequency. (the initial
frequency is 87.5KHz)
- Keep long press the PLAY/PAUSE button for FM auto scaning and station
saving. The LCD will show a running frequency from 87.5-108Mhz and will
show all available scaned & saved stations from P01, P02..., it can save a
max. 30 stations.
- You can procede a manual scan by both long press (over 2 seconds) the
Previous or the Next button for a fast scan down or up frequency and short
press the Previous or NEXT button to select saved station. the LCD display will
show your selected station P01 and then detail frequency.
- Adjust the volume control to your preferred sound level.
- Pull up the antenna and adjust rod antenna to improve FM reception.
BLUETOOTH PLAYING
1. Push the function switch to the USB/SD/BT position for a pairing mode, and
the LCD display will flash letter of "bt".
2. Set your mobile phone or other BT devices to BT mode, and select the paired
name "BB-2000" to connect and input the Bluetooth pin "0000" if needed, the
BT indicator will stay on after the connection is complete.
3. Long press the Mode/ /Play/Pause button to disconnect the pairing device,
and enter into new pairing mode.
4. Press the Mode/ /Play/Pause button button to play or pause.
5. Press the Previous/Fast Rewind Button or Next/Fast Forward Button to select
your favorite songs.
6 When there is a call coming in, Press the Mode/ /Play/Pause button to
answer. You can talk close to the MIC (14) for a clear sound. Press again the
Mode/ /Play/Pause button to end the call. Long press the Mode/ /Play/
Pause button to reject a call.
PLAYING USB /SD CARD
- The system is able to decode and playback all MP3 files stored in the memory
media with a USB hard and or SD card.
- Set the function switch to USB/SD/BT.position.
- Plug-in the USB pen –drive or SD/MMC card storage & make sure it goes in
completely with the USB port or card slot.