Publicidad
Safety
R
Take care when handling tools used for building the
shed.
R
Keep children and animals away from the assembly
site.
R
Some parts of the shed have sharp edges and can
cause damage. Be sure to wear personal protective
equipment: work gloves, long sleeves and goggles.
R
Wear safety goggles for eye protection when using
machine tools. Make sure power tools are well sealed
to avoid any risk of electric shock.
R
When using a ladder, make sure it is stable on the
ground. Never put all your weight on the roof or any
other part of the shed.
R
Do not try to assemble the shed in high winds, as the
work site may become hazardous.
R
Be careful when working on the roof, and use
appropriate safety equipment.
R
Make sure you do not put anything onto shed parts so
they maintain their original condition.
R
Fuels and corrosive agents must be stored in sealed
containers.
R
Protect the shed from strong winds by fixing it properly
to the foundation.
Foundations
R
Check local planning regulations before installing your
shed.
R
Choose a suitable location and allow enough working
space around the shed.
R
Make sure you have a good base foundation before
beginning shed assembly.
R
The shed must be built on a solid, flat foundation. For a
suitable base, we recommend that you use reinforced
concrete or large concrete slabs.
R
For a reinforced concrete foundation, prepare an initial
layer of stones/pebbles. The foundation must be at
least 10 cm thick. Leave your cement to dry for at least
48 hours.
R
Make sure that the foundation is levelled and allows
water drainage to avoid freezing.
R
If the ground is at risk of freezing, the foundations must
be below the frost line; otherwise, you need to install an
insulation slab to stop frost from affecting the structure.
R
Adjust your screwdriver torque limit so you do not
damage the wood.
R
Check each shed dimension to make sure it sits
perfectly on the foundation.
R
In order to avoid moisture rising through the walls,
please always isolate the first plank from the slab using
a level band (not supplied with garden shelters).
R
Carefully laid foundations are crucial to successful
construction. Foundations must be perfectly level. The
foundations and structure must remain horizontal. Even
after construction, the wooden structure must be able to
expand and contract naturally.
R
WARNING: If the shed is not constructed in one go, we
advise you to store it inside or in a protected location. If
this is the case, do not unpack the product. It must not
be laid directly on the ground to prevent any contact
with moisture. It is important that the storage location is
flat, or your wooden baulks may buckle.
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY.
Warranty Period and Conditions
At Blooma we devote special attention to selecting high-
quality materials and use manufacturing techniques that
enable us to create designer and durable product ranges.
That is why we offer a 5-year warranty (Roof is under
2-year warranty) against product manufacturing defects.
This product is under warranty for 5 years as from the date
of purchase, for normal, non-professional household use.
The warranty shall only apply upon presentation of the till
receipt or the invoice. Keep your proof of purchase in a
safe place.
The warranty covers product breakdowns and malfunctions
under the condition that the product is used in accordance
with its intended use and subject to installation and
maintenance in accordance with good practice and the
information contained in the user's manual.
This product must be installed so that it may be later
removed without damaging it.
This contractual warranty does not cover defects and
damage caused by the natural wear of parts, bad weather,
flooding, heat releases, freezing, damage caused by
water quality (hardness, aggressiveness, corrosion,
etc.), by the presence of foreign bodies transported by
water or otherwise (sand, filings, etc.) or the lack of room
ventilation, and damages that could be the consequence
of improper use, misuse, negligence, accident or
maintenance that is defective or does not comply with
good practice or the information in the user's manual.
The following are also excluded from the warranty: harmful
consequences due to the use of accessories and / or non-
original equipment manufacturer or improper replacement
parts, disassembly or product modification.
The warranty is limited to those parts recognised as
defective. Under no circumstances shall it cover fringe
expenses (travel, labour) and direct and consequential
damage. Guarantee related queries should be addressed
to a store affiliated with the distributor you purchased the
product from.
This guarantee is in addition to and does not affect your
statutory rights.
Manufacturer:
Kingfisher International Products Limited,
3 Sheldon Square, London, W2 6PX,
United Kingdom
Distributor:
B&Q plc, Chandlers Ford, Hants, SO53 3LE
United Kingdom www.diy.com
SFD Limited, Trade House, Mead Avenue,
Yeovil, BA22 8RT, United Kingdom
Publicidad
