Part Names; Conversion °F/°C - Reli On 510REL Manual De Instrucciones

Lens
Probe
CONVERSION BETWEEN
FAHRENHEIT to CENTIGRADE (°F/°C)
• The thermometer is initially set at Fahrenheit °F
• Follow the steps below to change the measurement scale
from °F to Centigrade °C:
Note:
Changing the measurement scale "°F" to "°C" or "°C" to "°F" deletes
the previous valued measured.
1) Be sure unit is in the off position (blank display).
2) Press and hold the Button for 3 seconds until the "°F"
flashes and you hear one beep.
3) Press button again, now "°C" flashes.
4) After five (5) seconds the unit will shut off.
• The desired mode has been set.
• Repeat the process to reverse measurement scale if desired.

PART NAMES

TITLE
Lens cover
4 4
Lens
Probe
Storage case
(with 10 lens covers inside,
plus 1 on the thermometer)
Button
T
Display