Pairing Bluetooth Devices (One-Off); Volume Control - Marmitek BOOMBOOM 540 Manual Del Usario

PAIRING BLUETOOTH DEVICES (ONE-
OFF)
The BoomBoom 540 is able to remember up to 8 paired devices. As a
result it is not necessary to pair a device every time you connect it. If a
th
9 device is paired with the BoomBoom 540, the device which has
been originally paired with the BoomBoom 540 will be deleted from
its memory.
1. Make sure the BoomBoom 540 is turned off.
2. Press and hold the POWER [5] button for 7 seconds to put the
BoomBoom 540 in pairing mode. Release the POWER button as
soon as you hear two short 'beep' tones. The red and blue LED
will flash alternately.
3. Turn on a device that supports Bluetooth, such as an iPod,
iPhone, Android or mp3 player and go to: Settings > General >
Bluetooth. Click ON 'Bluetooth' and the BoomBoom 540 will
appear on the device. Click ON 'BoomBoom 540'. The device is
now connected and paired with the headphone. If the device
prompts for a pairing code, enter:"0000".

VOLUME CONTROL

Tap VOLUME+ [6] to increase the volume. When maximum
1.
volume has been reached, a tone indicator will sound.
Tap VOLUME- [7] to decrease the volume. When minimal volume
2.
has been reached, a tone indicator will sound.
Press Next [3] or Previous [2] to listen to the next/previous track.
3.
6
Adjust the fit of the BoomBoom 540 by
changing the length of the headband near
the ear pads.
The ear pads may be rotated 90 degrees
and can be folded inwards, allowing you to
easily carry and store the BoomBoom 540.
© MARMITEK