Technical Specifications - Marmitek Invisible Control 6 XTRA Manual Del Usario

direct sunlight, Flat Screen TVs, (LCD, Plasma, LED),
fluorescent lighting or energy-efficient light bulbs.
The IR receiver does not work with some A/V devices and

models that use higher IR frequencies such as
Bang&Olufsen (B&O).
Ensure that the IR receiver and the IR blaster extender cable

are correctly connected and that these are plugged in
properly.
Do you have other questions that have not been resolved by the
above information? Please go to
7

Technical specifications

IR Module
Feed POWER:
IR blaster LEDs connections:
IR Receiver connection:
Dimensions:
IR receiver
Frequency range:
IR reception range:
Length of cable:
IR reception angle:
Dimensions receiver bloc:
IR Extension cable
IR blaster LEDs:
IR transmission range:
Length of cable:
10
www.marmitek.com
100-240VAC 50/60Hz, mini USB
(supplied).
2 x 2.5 mm jack (mono).
1 x 3.5 mm jack (mono)
80 x 43 x 19 mm
30-60 KHz.
± 10 metres.
3 metres
0° (+30°/-30° from centre).
15 x 30 x 11 mm.
2x IR Extension cable with one IR
blaster LED
2 metres
2 metres
© MARMITEK