Using The Appliance - T-Fal Frutelia Plus Manual Del Usario

USING THE APPLIANCE

• Place the pulp container in the correct position (see
• Place the juice collector (E) on the body of the appliance (see
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is
properly clipped onto the drive shaft (K) (see
• Fit the cover (C) on the appliance in order to have the pulp evacuation
exit to the rear (see
• Lock the two handles (H) on the cover (C). You will hear an audible "click"
(see Fig. 4).
• Slide the pusher (A) into the feeding tube (B) aligning the groove on the
pusher with the small ridge in the feeding tube.
• Place a glass under the pouring spout (F) in front of the appliance
(see Fig. 5).
• Make sure the spout is opened to let the juice flow.
• Plug in the appliance.
• To start the appliance, use the control button (I).
• Cut the fruits or vegetables into pieces if necessary after removing the seeds.
• Insert the fruits or vegetables through the feeding tube (B).
• The fruits and vegetables must be inserted only while the motor is running.
• Do not press too hard on the pusher (A). Do not use any other utensil.
NEVER push food with your fingers.
• When you have finished, stop the appliance by turning the control
button (I) to 0 and wait until the sieve (D) stops completely.
• To prevent spilling on the countertop, you can turn the spout to stop the
juice flow (see
• When the pulp container (G) is full, or the juice flow slows down, empty
the pulp container (G) and clean the sieve (D) and the cover (C).
Ingredients
Apples
Pears
Carrots
Cucumbers
Pineapple
Tomatoes
Celery
8
Fig. 3).
Fig. 6)
Approximate weight (kg)
1(about 2 cucumber)
Fig.
1
1
1
1
1
1
Fig. 1)
Fig.
2).
Quantity of juice
(ml)
600
600
550
650
550
600
700
2).