artisan IKA lab disc Instrucciones De Manejo página 8

Now press the
speed you require. The LED between the buttons will
flash during setting.
To select the reverse mode and invert the direction of stir-
ring at regular intervals, press the
se mode the stirring direction will be inverted every 30
seconds; there will be pause of 5 seconds between each
changeover. The LED above the
when the reverse mode is active.
The speed setting and reverse mode selection will
remain unchanged when the instrument is unplugged.
Caution: At some speeds, irregularities in the shape of
the stirring bar and of the bottom of the container can
cause the bar to move irregularly during stirring. Increase
or decrease the speed until the stirring bar begins to rota-
te evenly.
Maintenance and cleaning
The IKA ® lab disc is maintenance-free. It is subjekt only
to the natural wear and tear of components and their sta-
tistical failure rate. Use only cleansing agents which have
been approved by IKA to clean IKA devices.
To remove use:
Dyes
Constructions materials water containing tenside / iso-
Cosmetics
Foodstuffs
Fuels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
button and the button to set the
button. In the rever-
button will flash
isopropyl alcohol
propyl alcohol
water containing tenside / iso-
propyl alcohol
water containing tenside
water containing tenside
For materials which are not listed, please request informa-
tion from IKA. Wear the proper protective gloves during
cleaning of the devices. Electrical devices may not be pla-
ced in the cleansing agent for the purpose of cleaning.
Before using another then the recommended method for
cleaning or decontamination, the user must ascertain with
the manufacturer that this method does not destroy the
instrument.
Guarantee
You have purchased an original IKA laboratory machine
which meets the highest engineering and quality stan-
dards.
In accordance with IKA guarantee conditions, the guaran-
tee period is 24 months. For claims under the guarantee
please contact your local dealer. You may also send the
machine direct to our works, enclosing the delivery invo-
ice and giving reasons for the claim. You will be liable for
freight costs.
7