Graco Angelcare Manual Del Propietário página 20

Using Your Monitor
After the monitor has been set up and tested, place your baby in the crib. If you have selected the
Movement and Sound
movements and the Nursery and Parents' Unit will act as a sound monitor. If you have only selected the
Sound feature, it will not detect your baby's movement but will continue to work as a regular sound monitor
and only transmit nursery sounds. If you have selected the Movement
Unit before you remove your baby from the crib. If you forget to do this, the alarm will sound after 20 seconds.
Using Your Monitor
for More Than One Baby
The Angelcare® monitor can only be used to monitor the movement of one baby at a time. If you have twins or
you want to monitor two babies at the same time, you will need to purchase two complete units. Please
remember the babies will have to sleep in separate cribs and the two sets of monitors must be on different
channels to work properly.
feature on the Parents' Unit, the Sensor Pad will detect your baby's slightest
20
feature, be sure to turn off the Nursery