Danby Designer DUF138E1WDD Guía Del Proprietario De Utilizacion Y Cuidado página 8

Installation Instructions
LEVELLING LEGS
If the unit is not level, the doors and seal may not function correctly, causing the
unit to operate ineffi ciently. To level the unit turn the levelling leg(s) clockwise to
rise or counter-clockwise to lower.
DECORATIVE COVER
To install the decorative cover, please follow the steps in the below diagram. The decorative cover is installed at the bot-
tom of the unit.
HANDLE INSTALLTION
The unit must be unplugged before installing the handle.
1. Take 2 screws and install them in the pre-drilled door holes, be
sure to turn them until they cannot be further tightened.
2. Position the handle over the screws.
3. Put the other set of handle screws in the hole on the side of the
handle and turn until they are fully tightened.
5