Attaching The Paper Guide - Brother QL-650TD Guia Del Usuario

24
STEP1 Before using the printer
5
Push down the roll release lever and close the
DK Roll cover.
If the DK Roll edge cannot be pushed in just before the
cutter (as described in step 4), insert the edge of the DK
Roll as far as possible and pull down the release lever.
When finished, close the DK Roll cover.
Pressing the Feed button feeds the DK Roll to the
correct position (when using DK Tape, cut the fed tape
as needed).

4 Attaching the paper guide

The printer contains a paper guide which can hold up to 10 individual label sheets.
1
As shown in the right hand
ilustration, attach the paper
guide to the front face of the
printer.
When printing more than 10
labels continuously using the
auto cut function, remove the
paper guide to prevent a paper
jam.
Paper guide