Principle Diagram - Lamborghini Caloreclima BDS 200 Manual De Instalación, Uso Y Mantenimiento

PRINCIPLE DIAGRAM

C Hot water outlet
F Cold water inlet
RC Hot water tank recirculation
VT Thermostatic valve
1 On-off valves
2 Pressure reducer
3 Filter/softener
WARNING
•
Choosing and installing the apparatus components is the installer's responsibility, who shall work according to proper
technical specifications as provided for by the Law in force.
•
In the event of non-softened water, calcareous deposits may form, thus hindering thermal exchange.
•
When using a solar boiler whose pressure values exceed 6 bar, provide for a pressure reducer.
•
Safety valve outlets shall be connected to a suitable collection and emptying unit. The solar boiler manufacturers is not
held liable for any flooding events caused by the safety valve activation.
•
The sanitary system MUST BE EQUIPPED with a safety valve, the automatic bleed valve, the expansion tank and the
boiler outlet cock.
•
Provide for an expansion tank capable of resisting high temperature, featuring a membrane which the water-glycol
mixture cannot etch.
•
All piping, collectors, exchanger and water devices shall undergo tightness test.
•
In the event of pressure fall in the solar apparatus, top up with water-glycol mixture.
•
The direction of the solar circuit circulator delivery shall be towards the higher loss of pressure.
4 Safety valves
5 Expansion tanks
6 Exhaust outlets
7 Check valves
8 Circulators
9 Capacity governor-gauge meter-thermometer
10 Solar panel
11 Bleed valve
- 25
-
INSTALLATION