Maintenance And Troubleshooting; User Maintenance - Smarter tools 71PC Air Tool Kit Manual De Instrucciones

SECTION 4:

MAINTENANCE AND TROUBLESHOOTING

4.1 User Maintenance

These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the air-operated tool.
1. Daily – Air Supply Maintenance:
Every day, perform maintenance on the air supply according to the
component manufacturers' instructions. The lubricator's oil level needs
to be maintained and the moisture filter must be regularly drained.
Performing routine maintenance on the air supply will allow the tool to
operate more safely and will also reduce wear on the tool.
2. Quarterly – Tool Disassembly, Cleaning, and Inspection
Every 3 months, have the internal mechanism cleaned, inspected, and
lubricated by a qualified technician.
CAUTION:
PROCEDURES NOT SPECIFICALLY EXPLAINED IN THIS
MANUAL MUST BE PERFORMED ONLY BY A QUALIFIED
TECHNICIAN.
WARNING!
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION: TURN OFF THE TOOL, DETACH THE AIR
SUPPLY, SAFELY DISCHARGE ANY RESIDUAL AIR
PRESSURE IN THE TOOL, AND MAKE SURE THE
TRIGGER IS IN THE OFF POSITION BEFORE
PERFORMING AND INSPECTION, MAINTENANCE, OR
CLEANING PROCEDURES.
WARNING!
TO PREVENT EXPLOSION: LUBRICATE THE TOOL ONLY
WITH SPECIFIED LUBRICANT. LUBRICATE THE AIR INLET
USING ONLY PNEUMATIC/AIR TOOL OIL. OTHER
LUBRICANTS MAY DAMAGE THE MECHANISM AND MAY
BE HIGHLY FLAMMABLE, CAUSING AN EXPLOSION.
WARNING!
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: DO
NOT USE DAMAGED EQUIPMENT. IF ABNORMAL NOISE,
4-1