Hkoenig GSX16 Manual De Utilización página 9

•
Install the upper cover (2) on the bowl.
•
Attach it to the appliance by rotating it clockwise until it fits into the relevant place
•
Place the juice and pulp containers (7, 9) under the respective outlets.
Caution!
The appliance will not work without the safety lock properly installed.
APPLIANCE DISASSEMBLY.
To disassemble the appliance, perform the assembly procedure in the reverse order.
1. Remove the juice container.
2. Remove the feeder from the bowl to activate the safety lock.
3. Remove the bowl from the base.
4. Remove the screw-conveyor shaft with the stainless steel strainer.
5. Turn the stainless steel strainer to the left to remove it.
TURNING THE APPLIANCE ON/OFF
To turn the appliance on, precisely install the feeder on the bowl to release the safety lock.
To turn the juicer on, toggle the switch on the top of the body to the ON position.
1. Appliance off position
2. Reverse operation position
3. Appliance on position
PREPARATION OF FRUIT AND VEGETABLES FOR