Publicidad
Idiomas disponibles
Idiomas disponibles
Double passive infrared detector with field-of-view
Made in Italy
EMC 89/336/CEE
Double element digital sensor (Digipyro™): 2
Anti-disorentation articulation included
Blocking screw
Local alarm memory signallization escludible
"Pulse counter" function with automatic reset
"Pulse counter" function settable: 4
Antiopening protection tamper
High immunity RF: 30Vm
Power supply voltage: 12Vcc ±10%
Max current consumption: 10mA
Beams of the lens: 17 (su 3 livelli orizzontali) + 3 (su 1 livello verticale)
Levels of the lens: 3
Coverage angle (PIR): H: 120°; V: 60°
Anti-masking lens
(PIR): H: 85°; V: 60°
Coverage: max. 15mt
Escludible signalling LED
Solid state relay outputs NC 100mA, 50Vcc max: 1
Initial stabilizing time: 60"
Operating temperature: +5°C ÷ +40°C
According to the 1st level of CEI79-2 standard.
Dimensions (L)x(A)X(H): 59x99x60
The volumetric detector IRIS is provided with a circuitry achieved by a SMT technology in order to warrant more stability, during its employment, and more immunity
from electromagnetic jamming.
Its sensibility regulation allows to install it in every place that needs a reasonable, safe and volumetric protection.
Its "Alarm Memory" function, signalled by the incorporated LED, allows to find out which detector has caused the alarm, if there are other installed detectors in the
same area, thanks to the "interrupted positive" (+12V Int.), that is a connection to the central to be done during the installation. This signalling is reset at every re-placement of
the anti-theft kit.
INSTALLATION
Fix the bottom of the articulation to the wall after having pierced and applied the dowel. Make sure of having fixed it in a good way and that the wall surface is plane and not
subject to vibrations
.
Open the detector and fix the bottom into the articulation. Screw up the dowel after having oriented the detector
NOTA:
Do not point it towards objects that could produce sudden changes of temperature, as central heating, radiators, air-conditioners, flames, etc.Avoid also its
installation near these ones.
Make the connections according the following scheme.
Carry out the connections in accordance to the enclosed diagram:the terminal M can be connected to +INT of the antitheft control station if the alarm memory function
enable is desired, otherwise leave it unconnected.
WARNING:
Do not touch with finger the pyroelectric sensor!
PIR frontale
Anti-sliding PIR
12
mt
3
6
2,2
mt
3
6
15
15
IRIS2
1
3
3
Publicidad
