Using The Remote Control; Installing The Battery - Whalen FP26-1A Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation (continued)
6
Using the main power button
Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press
again to turn the unit off.

Using the Remote Control

1

Installing the battery

For replacement batteries, use lithium-based CR2025 batteries.
Take out the battery bracket.
1
PUSH
2
OPEN
Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.
LITHIUM BATTERY
CR2025
3V
Press the battery bracket into the remote control, making sure it snaps into position.
Turn the remote over and aim it towards the fireplace/heater unit.
Press the power button on the upper right, and see if the flames on the fireplace/heater turn on or off.
If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
6
7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido