Sea gull lighting 7821402 Serie Manual Del Usuario página 2

Install the Fixture
1A
MOUNTING PLATE
FIXTURE
MAX 60
Use 120 volt Watt
Type A19 Medium Base Lamp.
Secure the mounting plate to the electrical box with two mounting plate screws.
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
Connect the white fixture wire to the neutral power line wire with a wire nut.
3
4 Connect the black fixture wire to the hot power line wire with a wire nut.
Align the key slots on the fixture base to the mounting plate screws, place the fixture base onto the mounting plate,
5
and secure it by rotating it to the narrow portion of the keyed slot.
6 Screw the threaded nipple to the bottom of the fixture base.
7 Screw the lamps into the sockets.
Place the shade and washer onto the threaded nipple and secure them in place by tightening the finial.
8
4
2
1
6
7
8
FINIAL
8
2
ELECTRICAL BOX
3
MOUNTING PLATE SCREW
1
THREADED NIPPLE
WASHER
SHADE