Alcad 912-TP QPSK A PAL Guía Rápida página 3

QUICK PROGRAMMING GUIDE 912-TP QPSK TO PAL
Start/on
Main menu
Transcodifi cador 912 QPSK - COFDM
Select series
NIT Table
Select series
912-TP Transmodulator QPSK-PAL
912-TQ Transmodulator DVB-S/S2 to DVB-C
912-TP Transmodulator QPSK-PAL
Confi gure module
Set the programming switch of the 912-TP module to the ON position. The programming
Input
Input frequency
1952
Symbol rate QPSK
1000
FEC QPSK
Auto
Output
OSD Language
English
Standard
BG/ stereo
Program by
Channel
Channel
Frequency
Channel
21
Frequency
471.25
OK
OK
OK
indicator will now light up and remain lit.
MHz Keypad + T
Keypad + T
KBd
OK+
OK+
OK+
OK+
Keypad + T
or
OK+
Keypad + T
MHz
Press the Power On key of the PS-011 to start up the
system.
Choose Select Series to select the programming series.
Select the series: 912-TP Transmodulator QPSK -PAL.
To commence programming the module, select Confi gure
module.
Use the numeric keypad to enter the IF frequency of the
transponder. Then press T to transmit.
Using the numeric keypad, enter the symbol rate of
the transponder. Then press T to transmit.
Select the error correction rate (FEC QPSK) of the
+OK+T
transponder. By default it is set to Auto. Then press
T to transmit.
Select the language of the OSD. Then press T to
+OK+T
transmit.
Select the standard for the output channel. Then press
+OK+T
T to transmit.
Select the programming mode of the output of the
+OK
module: channel or frequency.
If you are programming the output by channel, you
can either enter the channel using the numeric keypad
or select a channel from the pulldown list. Confi rm you
+OK+T
choice with OK, then press T to transmit.
If you are programming the output by frequency, enter
the frequency using the numeric keypad. Then press T
to transmit.
ENG