Material Composition; Instructions For Use - Bort TaloStabil Plus Sport Instrucciones De Uso

6
In the next step, guide the strap through underneath the sole of the foot to the
inner side of the foot.
7
Then, draw the Stabilo strap upwards from the inside diagonally over the
metatarsal to the outer side of the ankle joint again. Raise the inner edge of
the foot slightly here.
8
Finally, fasten it onto the inner side from behind.
Tip: The tighter you tense the Stabilo strap, the greater the stabilising effect is.
Close the Velcro fasteners in order to avoid early wear to the Velcro surface.
Attention: Avoid damages to the knitted fabric with the Velcro fastening.
Removal
To remove the support, please grasp the lower edge and pull it down over the foot.
Tip: Close the Velcro fasteners in order to avoid early wear to the Velcro surface.

Material composition

Polyamide/COOLMAX
The sewn in textile label provides the precise material composition.
Cleaning information
Delicate wash
Do not dry in a tumble dryer
Do not use fabric conditioner. Stretch back into shape and dry in the fresh air. Close
the Velcro fastenings to avoid damage to other laundry items.
Guarantee
The legal regulations of the country in which you acquired the product apply to the
purchased product. Please contact your specialist retailer if you suspect a warranty
claim. Please clean the product before submitting a warranty claim. If the enclosed
instructions for use have not been properly observed, the warranty may be impaired
(PA), polyamide (PA), elastane/LYCRA
®
Do not clean chemically
Do not iron
(EL), silicone (SI).
®
Do not bleach
EN
11