Operating Instructions; Care And Maintenance - Pleasant Hearth L-24 Manual Del Usuario

OPERATING INSTRUCTIONS

The log set features separate controls on the side of the unit for flame effect and for sound control.
This allows you to operate the unit in two (2) different modes:
• As a full-featured log set - both flame effect and sound on. This mode allows you to enjoy the
look of the fire along with the sound of a fire burning.
• As a visual effect - only the flame effect is on; the sound is off.
Main Power/Flame Effect Button:
1
This button supplies power to the light effect display. The light effect must be in the "ON" position
for the sound effect to be able to work.
Sound Control Button:
2
This button controls the sound effect of the log set with a high and low volume setting. Pushing
the button once enables the sound at the high setting. Pushing the button again changes the
volume to the low setting. Pushing it a third time turns the sound off. The flame effect must be in
the "ON" position for the sound to work.

CARE AND MAINTENANCE

Before attempting ANY maintenance:
1. Turn off power to the unit.
2. Unplug the power cord from outlet.
3. Let log set cool if it has been operating.
Cleaning of the log set is to be done only with a vacuum cleaner or by using a soft cloth, slightly
dampened in water (if needed, a small amount of dish soap can be added to the water) and dried
using a clean, dry soft cloth. DO NOT use any abrasive household cleaners as these products will
damage the unit.
2
8
1