Klein Tools Hydra-Cool 2214 Manual De Instrucciones página 6

3 Insert the free end of the pad through the metal cinch loop.
Webbing must pass through metal cinch loop.
Webbing must not be twisted
4 Continue to pull the webbing until the MINIMuM WrAP
WArNING label is through the metal cinch loop. This will
ensure the minimum amount of Velcro
adhesion to properly secure the pad to your leg. Failure to do
so could cause release resulting in serious injury or death.
WArNING: MINIMuM WrAP LOCATION: Pass warning tag
through metal cinch loop to ensure proper hook and loop
contact. Failure to achieve the minimum wrap may cause
release resulting in serious injury or death.
6
5
6
hook and loop
®
Wrap free end around leg.
7
Pull the free end of the pad until it is snug and wrap it
around your leg.
Secure the free end around the pad adhering the Velcro
hooks – (sharp side) to the Velcro
Before climbing check the security of the Velcro
pad and climber by taking a step or two on the structure
you are climbing.
®
loops – (soft side).
®
Free end secured around leg.
climber
®