Beper Lucilla Manual De Instrucciones página 16

Electric Espresso maker Use instructions
IMPORTANT: the first time that the coffee maker is used, all the accessories and
the internal circuits should be washed with hot water. Then make a few batches of
coffee to throw away.
Fig. C
1 Plug the coffee maker into socket, the power on and LED display "00:00".
2 Use the coffee maker directly, press "ON/OFF" start work, indicator light on. The power
cut off after 30 minutes automatic.
3 Programmable timer mode: Press and hold "Current Time" to set current time. (Each
short press will advance the time by one minute and keep holding will advance the time
quickly.)the LED display the current time when finished.
4 Press "brewing time", set the desire time in same way.
5 Press "TIMER ON", indicator light on, and "ON/OFF" and "HOLD KEY" start work syn­
chronization, Timer set successful
6 "TIMER ON" light off when brewing time, "ON/OFF" light on, start brewing coffee
7 The brewing will be finished in 4­5 minutes. the power will cut off after "ON/OFF" light
on 30 minutes.
NOTE:
a. The time will start from zero again when it reaches 24:00, which means the timer can
work for maximum 24 hours.
b. the timer without memory function, Unplug the coffee maker will display "00:00"
c. the Max programmable reserve time is 15 hours
­ synchronization start with "ON/OFF"
­ Press this key,all other switch can't operable
­ decontrol: press and hold for 3 seconds,
­ Press to start brewing directly.
­ synchronization start with "HOLD KEY"
­ the power cut off automatic after 30 minutes
­ press and timer start work ,indicator light on
­ synchronization start with "HOLD KEY"
Examples
Suppose it is 21:00 now. If you want to enjoy coffee at 07:00 the next morning, simply set
the programmed timer as following:
1 Plug the coffee maker into socket
2 Press and hold "Current Time" to set the time 21:00
3 Press and hold "Brewing Time" to set the time 07:00
4 Press "Timer On" to activate the timer
16