Parrot ASTEROID Guía De Utilización Rápida página 14

broadcast any videos w hile the vehicle is
moving. The same applies
applications.
If you attempt to use an application that is not
intended for navigation or driving assistance
w hen you are driving, an on-screen w arning
w ill be displayed. To w atch a video on the
Parrot ASTEROID Tablet's screen, make sure
that the vehicle is stopped in a safe area and
that the hand brake is on.
SD Card
An SD card is included w ith the Parrot
ASTEROID Tablet. It allow s you to store music
tracks and applications w hich are not already
installed on the Parrot ASTEROID Tablet. The
insertion of the SD card into the Parrot
ASTEROID Tablet is mandatory to use audio-on-
demand and navigation applications.
14 English
14 14 English
Installation
to any w eb
Before you begin
Note: We advise our customers to have the Parrot
ASTEROID Tablet fitted by a certified Parrot
installer.
Installing the Parrot ASTEROID Tablet is done by
inserting it betw een the car stereo and the
vehicle.
Note: If your car stereo is not fitted with ISO
connectors, you need to purchase an ISO adapter
cable to simplify the wiring procedure. Refer to the
Vehicle compatibility section on the Parrot
ASTEROID Tablet support page to check whether an
ISO adapter is necessary on your vehicle.
Start by removing the car stereo from your
vehicle. You may need release keys to do so.
Refer to your car stereo's w iring diagram.
Before you install the individual components,
check that the installation locations have been
selected in such a w ay that the cable length is
sufficient to connect every element. Once the
installation is complete, make sure that no cables
are pinched or trapped.
The connection number indications in the next
sections correspond
represented on the diagrams p.6 / 7.
Connecting the audio cable
Join the vehicle audio cable to the connector of
the Parrot ASTEROID Tablet (Connections 1A
and 2).
If your vehicle is equipped w ith an amplifier, use
the Front and Rear Line Out outputs on the
electronic box to avoid saturation problems such
as popping in the speakers, background noise
etc. Use one or tw o jack cable(s) to connect the
Parrot ASTEROID Tablet Line out outputs to your
vehicle audio system (diagram p.7).
Connecting the pow er cable
1. Unplug the battery before installing the
pow er cable.
2. Connect the ISO male connectors of the
Parrot ASTEROID Tablet to the car stereo
(Connection 3).
3. Join the vehicle's pow er supply cable to the
ISO female
ASTEROID Tablet (Connection 4).
The red w ire of the Parrot ASTEROID Tablet
cable must correspond to the constant +12V
to the connections
supply, the orange w ire to the ignition +12V and
connector of the Parrot
the
w
su
ba
No
scr
th
inf
On
the
co
fu
Co
Th
yo
Pa
etc
su
mu
co
ve
ISO
mu