Video Output; Freesync - LDLC Essentiel+ Manual Del Usuario

Video Output:

Conect an HDMI or VGA cable to the monitors outlet and check that the cable is plugged to the
corresponding port on the mother board of your computer or your graphic card if any.
Note : VGA cable not included.

FreeSync :

The feature itself is off by default. To use this feature, you'll need:
1. A computer equipped with Free Sync technology
2. An HDMI cable
3. Updated graphic pilots.
connect your computer and monitor with an HDMI cable. After connecting, you may receive a prompt
to enable the feature on your computer. If you do not receive the prompt, you may need to enable the
function in your graphics card menu. See your graphics card manufacturer's documentation for
instructions on how to turn on and/or enable FreeSync.
VGA
Connector
HDMI
Connector