Preventative Maintenance - Sunex Tools 1501 Manual Del Propietário

8. Carefully slide the wheels onto the axle by pushing the dolly towards the vehicle. It might be necessary to rotate the wheels so their hole
pattern will line up with the mounting studs.
9. Secure the wheel to the hub in accordance with the vehicle manufacturer's directions.

PREVENTATIVE MAINTENANCE

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential
personal injury hazards. Obey all instructions to avoid possible injury.
1. Always store the wheel dolly in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust,
or any other harmful elements. The wheel dolly must be cleaned of water, snow, sand, grit, oil, grease or other foreign matter before using.
2. Lubricate moving parts once a month with a general purpose grease, particularly the rear caster adjustment thread.
3. It should not be necessary to refill or top off the jack's reservoir with hydraulic fluid unless there is an external leak. An external leak
requires immediate repair which must be performed in a dirt-free environment by qualified hydraulic repair personnel who are familiar with
this equipment. Authorized Service Centers are recommended. IMPORTANT: In order to prevent seal damage and hydraulic failure,
never use alcohol, hydraulic brake fluid, or transmission oil in the hydraulic system. Use hydraulic jack oil, Chevron Hydraulic Oil
AW ISO 32 or its equivalent Unocal Unax AW 150.
4. Every wheel dolly owner is responsible for keeping the dolly label clean and readable. Use a mild soap solution to wash
external surfaces of the dolly but not any moving hydraulic components. Contact Sunex for a replacement label if your dolly label is
unreadable.
5. Inspect the wheel dolly before each use. Do not use the dolly if any component is cracked, broken, bent, shows sign of damage, or leaks
hydraulic fluid. Do not use the dolly if it has loose or missing hardware or components, or is modified in any way. Take corrective action
before using the dolly again.
6. Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with
this equipment.
LIMITED WARRANTY
SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS ® BRANDED PRODUCTS ARE
FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.
Sunex International, Inc. will repair or replace its Sunex Tools ® branded products which fail to give satisfactory service due to defective
workmanship or materials, based upon the terms and conditions of the following described warranty plans attributed to that specific product.
This product carries a ONE-YEAR warranty. During this warranty period, Sunex Tools will repair or replace at our option any part or unit which
proves to be defective in material or workmanship.
Other important warranty information:
This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or
replacement made by anyone other than Sunex Tools ® or its authorized warranty service centers. The foregoing obligation is Sunex Tools' sole
liability under this or any implied warranty and under no circumstances shall we be liable for any incidental or consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. If you have any questions about warranty service, please contact Sunex Tools ® . This warranty gives you specific legal rights
and you may also have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools
products regardless of whether or not the product is still covered by a warranty plan.
SHIPPING ADDRESS:
Sunex Tools
315 Hawkins Rd.
Travelers Rest, South Carolina 29690
1501 Rev. A
MAILING ADDRESS:
Sunex Tools
P.O. Box 1233
Travelers Rest, South Carolina 29690
3 rev. 3/9/20