Clarity W1000 Guia Del Usuario página 10

Warning: To prevent electrical shock,
always unplug the telephone line cord
from the wall before removing the cord
from the telephone. Never leave the cord
connected to the wall if it is not also
connected to the telephone.
• Hold the Clarity telephone so that the
holes on the mounting bracket line up with
the raised mounting pins on the modular
wall jack. Once the holes are lined up,
push the phone in towards the wall jack
and then slide the phone downward until it
is securely seated on the wall jack.
• Plug one end of the handset cord (coiled)
into the bottom of the handset.
10
INSTALLATION
• Plug the other end of the handset cord
into the jack located on the lower left edge
of the Clarity telephone.
• Place the handset in the cradle of the
Clarity telephone. The special tabs will
hold it in place.
Hook
Switch
Tabs
CLARITY W1000