Handling And Operating Method; Preparations For Starting - Dramm MS75E Manual Del Propietario Y Operador

3. Handling and operating method

Preparations for starting

1) Check that screws of equipment are not loose.
2) Connect hoses to pump as shown below. Connect discharge hose first, then bypass hose, and then
intake hose. Then connect discharge hose to applicator (spray gun, spray wand, etc.).
3) Remove the nozzle handle to disable spraying.
4) Before starting, make sure the pickup or intake
hose is submerged in water.
provides lubrication for the pump and will
prevent damage to the pump.
5) Tie the water intake hose and bypass hose
together with a band so that they will not pop
out of the chemical liquid tank during
operation.
WARNING
English
The water
Gasoline is highly flammable and explosive. You can be burned or seri-ouslyinjured
when handiing fuel. Stop the engine and keep heat, sparks, and flame away.
Handle fuel only outdoors. Wipe up spills immediately.
Intake hose
Bypass hose
Dischage hose
Bypass
15
Intake
Chemical liquid tank