Kohler K-1665 Guia De Instalacion página 6

Ceramic Bulb
Socket
3. Preparation - Wallboard Installation
Turn off the power at the circuit breaker.
Set the light fixture on a work surface with the circular opening
facing up.
Remove the ceramic bulb socket.
Install the mounting rod with the two tabs. Slide it through the
mounting slot until the large end touches the bar bracket.
Snap the tabs of the first mounting rod into the slot in the second
rod.
Install the rods on the other side of the light fixture in the same
manner.
1015878–2–B
Slot
Rod
Bar
Bracket
6
Tabs
Rod
Kohler Co.