Conceptronic CBTGPS32 Manual Del Usario página 15

ENGLISH
When searching for new Bluetooth
name "CBTGPS32". During the pairing process, you will be asked for a PIN-Code.
Note: The PIN-Code for the GPS Receiver is "0000".
This PIN-Code cannot be changed!
When the pairing process is completed you are able to connect to the GPS Receiver
through the Serial Port Profile (SPP).
When the connection between your device and the GPS Receiver is successful, the
blue LED of the CBTGPS32 will blink.
Note: When the GPS Receiver is in use by a Smartphone or PDA, it cannot be
paired with another device. You need to disconnect first before the GPS
Receiver can accept a new pairing process.
5. Using the CBTGPS32 in your Navigation Software
The CBTGPS32 can be used with a variety of navigation applications: Tom-Tom
®
Route 66, Microsoft
how-to connect to a GPS Receiver through your navigation application, please refer
to the manual of the navigation application.
Note: Most navigation applications can auto-detect the GPS Receiver through the
options menu. When you need to add the GPS Receiver manually, use the
following settings:
COM-Port
Baud-Rate
®
Devices, you will find the GPS Receiver with the
®
Auto-Route™ 2006 and others are supported. For instructions
: (COM-Port assigned by your Smart Phone/PDA)
: 4800 ~ 115200
15
®
,