ASSEMBLY INSTRUCTIONS
5.) Place the tank seat on the ground and place a 20 lb. propane tank into the tank seat. Tighten down
the screw on the side of the tank seat to secure the propane tank.
6.) Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the
collar of the gas cylinder, the regulator valve or the burner
and burner ports.
Connect the gas line to the tank by turning the connection
knob clockwise. Hand tighten only.
To disconnect the LP tank, make sure the valve on the LP
gas tank is completely closed.
Disconnect the connection knob by turning it counter-
clockwise until it is detached from the valve.
WARNING
Place the LP tank 56" away from the fire table
and locate the hose away from pathways or
places where it could become damaged
Watch your step while moving between the tank
and the fire table. Be careful not to trip on the
hose.
9
60"