Sony VPL-CS6 Manual De Instrucciones página 22

To connect a 15k RGB/Component equipment
Left side
POWER
SAVING
INPUT A
MENU
PUSH
PRO
ENTER
AUDIO VIDEO S VIDEO
ACCESS
TEMP/FAN
LAMP/COVER
a) Use a no-resistance cable.
Notes
• Set the aspect ratio using "Wide Mode" in the INPUT SETTING menu according to
the input signal.
• When you connect the unit to 15k RGB or component video equipment, select video
GBR or component with the "Input-A Signal Sel." setting in the SET SETTING
menu.
• Use the composite sync signal when you input the external sync signal from 15k
RGB/component equipment.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
SMF-402 Signal Cable
(not supplied)
HD D-sub 15-pin (male) ↔ 3 × phono jack
Stereo audio connecting cable
a)
(not supplied)
to audio
output
15k RGB/Component equipment
Connecting the Projector
to RGB/
component
output
21
GB