Safety Instructions; Protecting Yourself; Fuelling; Vibrations - Trueshopping MFS260C Manual Del Usuario

Safety Instructions

Read this manual in full before operating this
machine for the first time. If you have any
questions regarding the operation of the
machine, please contact the manufacturer.
CAUTION! In order to ensure your safety you
must follow the safety, installation and
operation instructions. Any person who uses
this machine should be fully aware of the
potential risks.
! You must be 18 or over to operate this
machine. Children must not operate this
machine.
! The manufacturer shall not be held liable if
the unit is altered outside of the information
printed in this guide.
! Always turn the engine off before
performing any maintenance
! Some components will become hot during
use
! WEAR EAR PROTECTION!
! SAFETY BOOTS MUST BE WORN
WHILE OPERATING THE MACHINE!
! WEAR SUITABLE EYE
PROTECTION!
! WARNING, PETROL IS
FLAMMABLE, TAKE
APPROPRIATE CARE!

Protecting yourself

! Do not use this machine in areas with poor
ventilation or indoors, when switched on, the
machine produces carbon monoxide!
! Do not operate this machine in adverse
weather or in situations where sure footing is
not guaranteed.
! Exercise common sense when operating this
machine, do not operate when under the
influence of alcohol or medication which may
impair judgement and concentration.

FUELLING

! Always switch the engine off before fuelling.
Open the tank cap slowly to avoid spillage due
to internal pressure. If the unit has recently
been in use, allow to cool down first. Not
allowing the unit to cool could cause the fuel to
ignite.
When replacing the fuel, be careful not to over
fill the tank. Any spillages should be cleaned up
immediately.
After filling ensure that the cap is secured
properly and that it will not work loose while
the machine is switched on.

VIBRATIONS

Vibrations from the machine make it difficult to
hold for long periods of time, this time can be
prolonged by wearing suitable gloves.

Protecting others

! Do not allow anyone to approach the
machine while in use, ensure the working
area is clear.
! Avoid jamming the blade as this can make
the machine suddenly difficult to control.
! Do not use the machine for any purposes
other than outlined in this book.
4