Publicidad
Idiomas disponibles
Idiomas disponibles
Operation:
1. Put the steam cleaner on the platform and open the safety cap.
2. Use the measuring cup to fill the water. Maximum volume is 400ML. We suggest you only fill
water 300-350ML to get the dry steam. If more than 350ml water, there may some water in the
steam at the first 2 minutes.
Special attentions:
* please use clean water (small solid particles may block pipe or make machine failure)
* please do not pour any chemicals such as alcohol, cleaning agents into the steam cleaner. (some
chemical solvents can easily cause machine failure, and even endanger the user's personal safety
in serious cases)
*If the tap water in your area is very hard, it is recommended that you mix the tap water with distilled
water. Otherwise, the steam cleaner could calcify prematurely and clog the steam nozzle.
*Please do not add water less than 150ml.
3.Close the safety cap anticlockwise.
4:Insert the mains plug into the socket, the red light will light up indicate heating.
As soon as the steam cleaner is operational, the green indicator light will on. The red indicator light
will on/off during usage.
Attention:
− Only use the product once the green indicator light
On at the first time. Otherwise, hot water that drips or sprays.
Publicidad
