Main Features - Risco RP432KPP2 Manual Del Usuario

EN
Introduction
The user-friendly wired LCD & Proximity keypad enables simple operation and
programming of the LightSYS (version 5.63 and above) and ProSYS Plus (version
1.2 and above) security systems, and for the CS (Version 3.1.0.0003).

Main Features

• Optional built-in proximity tag reader
• Wall mounting by screws
• Wall tamper protection
• Modern look and feel
• Simple to install with incorporated mounting bracket
Installation
Mounting the Keypad
Mount the keypad on the wall using the supplied mounting bracket.
To mount the keypad:
Figure 1 Figure 2
1. Separate the mounting bracket from the keypad (see Figure 1).
2. Insert the wires through the hole in the mounting bracket (see Figure 2).
3. Use the mounting holes as a template and secure the mounting bracket to the
wall using 4 screws and 1 extra screw for the tamper (see Figure 3).
3