Troubleshooting - H.Koenig OptiV8 Manual De Usuario

Trouble shooting
Problems
Iron won't heat
No steam go out when
pressing steam
after the desired
temperature is reached.
" "
blink quickly, other
fabric indicator turn
buzzer sound a "Bi». All
buttons are non- workin. it
will resume when
re-energized again.
Never dispose of your product with other household waste. Please inform yourself
about the local rules on the separate collection of electrical and electronic products.
The correct disposai of your old product helps prevent potentially negative
consequences on the environment and human health.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Possible causes
Incorrect connection to the
main socket
Handle has not been laid down
Temp setting at "
position
Unknown malfunctions
Temp setting at DRY position
switch
No water in water tank
Filter has not been well installed
into water tank.
Water tank has not been well
installed.
Defects with internai circuit,
off,
unit corne into self protect
mode
Solution
Re-plug the unit to main socket.
Lay handle down
Select the required ironing temperature
according to fabric setting chart.
"
Take to
manufacturer
examination and repair.
Select the required ironing temperature
according to fabric setting chart.
Fill water into water tank
lnstall filter into water tank
SIide water tank into the power base and it
will be locked in place until a "click" sound
produced.
Re-energized the unit again. If it still
can not resume, please take it to its
service agent or similarly qualified
persans for repair.
a qualified serviceman
or its service agent
or
for