Briteq BEAMBAR10-RGBW Manual De Instrucciones página 11

ENGLISH
[ETHERNET NET MASK]
Used to set the Net Mask of the projector while controlled using the Ethernet ports.
 Press the [MODE] or ↑/↓buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ↑/↓ buttons to select the desired netmask, there are 3 options:
 255.000.000.000
 255.255.000.000
 255.255.255.000
 Once the correct option shows on the display, press the [ENTER] button to save it.
[DMX UNIVERSE]
Used to set which DMX-universe should be used while controlled via the Ethernet ports.
 Press the [MODE] or ↑/↓buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ↑/↓ buttons to select the desired DMX-universe from 000 to 255.
 Once the correct universe shows on the display, press the [ENTER] button to save it.
Remark: the 512 DMX-channels of the selected DMX-universe are directly available on the DMX-output
without any kind of configuration.
[ETHERNET PROTOCOL]
Used to select which Ethernet protocol you want to use for communication.
 Press the [MODE] or ↑/↓buttons until the desired function is showing on the display.
 Press the [ENTER] button: the values can be changed
 Use ↑/↓ buttons to select the desired Ethernet protocol.
 Once the correct option shows on the display, press the [ENTER] button to save it.
Remark: currently only the Art-Net protocol is supported. Other protocols will follow, see firmware updates.
[FIRMWARE VERSION]
Used to show the current version of the firmware.
 Press the [MODE] or ↑/↓buttons until the FIRMWARE is showing on the display.
The firmware of this unit can be upgraded using a special upgrade tool with Windows® software. (separately
available from Briteq). More information about this can be found in the user manual of the upgrade tool and /
or our website: www.briteq-lighting.com
BRITEQ
®
9/86
OPERATION MANUAL
BEAMBAR5+10-RGBW