Hardware Installation - Conceptronic CLLCHATCAM Guía De Instalación Rápida

ENGLISH

5. Hardware Installation

After the driver installation is completed, you can connect the Lounge'n'LOOK Chatcam to
any available USB port on your PC or on any USB hub attached to your PC.
To use the microphone, connect the microphone cable to the MIC-In of your soundcard.
5.1 Windows 2000/XP
A. Windows will prompt a 'Found New Hardware Wizard'. Select 'No, not this time' and
click 'Next'. (Windows XP SP2 Only!)
B. Select 'Install the software automatically (Recommended)' and click 'Next'.
C. A popup message about digital signature or logo test will appear. Click 'Yes' or
'Continue Anyway'.
D. Click 'Finish' to complete.
Note: We advise to reboot the computer after the webcam installation.
5.2 Windows Vista
A. Windows will show a popup notification with the message "Installing device driver
software". Please wait until Windows Vista finishes the driver installation.
B. When the installation is complete, the message "Device driver software installed
successfully" will appear.
The webcam is now ready to use!
11