Accessories; Scope Of Supply; Warnings - Weller WDD 81V Instrucciones Para El Manejo

6. Accessories

5 13 500 99 Cleaning Tool
5 33 129 99 DS V 80 Desoldering Set UNC
5 13 191 99 DS 80 Desoldering Tool UNC
5 15 030 99 Holder AK 20
5 29 161 99 Soldering iron set WSP 80
5 33 111 99 Soldering iron set MLR 21
5 33 112 99 Soldering iron set LR 21, antistatic
5 33 113 99 Soldering iron set LR 82
5 33 155 99 Soldering iron set WMP
5 33 133 99 Soldering iron set WTA 50
5 13 050 99 Reflow soldering unit EXIN 5
5 27 028 99 Preheating plate WHP 80
5 25 030 99 Thermal insulating unit WST 20
5 31 181 99 External input unit WCB 1
5 31 180 99 External input unit WCB 2

7. Scope of supply

WDD 81V Power Unit
Control Unit Control Unit
DSX 80 Desoldering Set Mains Cable
Mains Cable 3.5 mm Jack
AK 20 Holder Operating Instructions
3.5 mm Jack Main Filter
Operating Instructions
Main Filter
Figure: Suction Nozzles, see page 66 +67
Figure: Circuit Diagram, see page 68
Figure: Exploded Diagram, see page 69

8. Warnings

1. The power cord should be inserted only in specially approved power sockets or
adapters.
WDD81V 27
2. Keep your work area in proper order.
Always return the soldering tool to its original holder when not in use. Do not bring combustible
materials near the hot soldering tools.
3. Take care for the surroundings.
Don't use the soldering tool in a moist or wet environment.
4. Protect yourself against electrical shocks.
Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.
5. Keep children at a distance.
Don't allow other persons to touch or disturb the soldering tool or cord. Keep other persons
away from your work area.
6. Store your soldering tool in an appropriate place
Unused soldering tools should be stored in a dry location which is out of the reach of children
(some place high or in a locked cabinet). Switch off all unused soldering tools.
7. Do not overload your soldering tool.
Use the soldering tool only with the specified voltage or specified pressure and pressure
range.
8. Use the appropriate soldering tool.
Don't use a soldering tool whose performance is not adequate for your work. Never use the
soldering tool for purposes for which is was not designed.
9. Wear suitable work cloths.
There is a danger of burning yourself with liquid solder. Wear the corresponding protective
clothing in order to protect yourself against burns.
10. Protect your eyes.
Wear protective eyewear. When working with bonding agents, it is particularly important to
observe the warning notices of the bonding agent manufacturer. Protect yourself against
spattering solder. There is a danger of burning yourself with liquid solder.
11. Use a soldering vapour suction device
If devices for solder vapour suction are available, ensure that these are connected and correctly
used.
22.04.2002, 10:10 Uhr
27