Troubleshooting - Medion MD 41350 Manual De Instrucciones

T
ROUBLESHOOTING
PROBLEM
GENERAL
No power supply
displayed
The player does not
work
The disc does not play
even though
been pressed, or stops
again immediately
The unit does not
respond to the remote
control
GB-50
POSSIBLE CAUSE / REMEDY
Check the mains connection: Is the plug firmly
inserted in the mains socket?
Press the
the remote control.
If the unit has been affected by a storm, static
charging or other external factor, try the
following procedure:
Press the
(standby mode). Then pull out the mains cable
and plug it back in.
Is the disc inserted with the title facing
PLAY
has upwards?
Check whether the disc has been damaged by
trying another disc. If the disc is dirty, clean it
carefully, wiping it from the centre to the edge
with a soft, dry cloth.
DVD: Does the DVD have the correct regional
code (2)?
If condensation has formed: give the player
one to two hours to dry off.
Check whether the batteries need changing
and have been inserted correctly. Remove
anything which may be blocking the signal
between the infrared transmitter, the remote
control and the unit's sensor.
Is the distance between the remote control and
the player too great (over 7 m)?
POWER
button on the player or on
POWER
button on the player
DVD MOBILE SYSTEM MD 41350