LaserLiner SmartLine-Laser 360 Manual Del Usuario página 10

2
Horizontal and vertical levelling
Release the transport restraint, set the ON/OFF switch to „ON". The laser
cross will appear. The laser lines can be switched individually with the
selection button.
LASER
The transport restraint must be released for horizontal and vertical
levelling. The laser lines flash and the LED lights red as soon as the
!
device is outside the automatic levelling range of 5°. Position the
device such that it is within the levelling range. The LED switches
back to green and the laser lines stop flashing (steady light).
3
Hand receiver mode
Optional: Working with the laser receiver RX
Use an RX laser receiver (optional) to carry out
levelling at great distances or when the laser
lines are no longer visible. To work with a laser
receiver, switch the line laser to hand-held
receiver mode by keeping button 6 (hand-
held receiver mode on / off) pressed. The laser
lines will now pulsate with high frequency,
making the laser lines darker. The laser receiver
can detect these pulsating laser lines.
!
Observe the laser receiver's operating instructions for line lasers.
10
GB
LASER LASER LASER
3 sec.