Adjusting Canadian French Rating; Troubleshooting - Insignia IS-LCDTV32 Guia Del Usuario

IN-LCDTV-32.book Page 28 Friday, May 13, 2005 4:15 PM
CANADIAN ENGLISH RATING CHART
E Exempt - Exempt programming includes: news,
sports, documentaries and other information
programming, talk shows, music videos, and
variety programming.
C Programming intended for children under age 8.
No offensive language, nudity or sexual content.
C8+ Programming generally considered acceptable for
children 8 years and over. No profanity, nudity or
sexual content.
G General programming, suitable for all audiences.
PG Parental Guidance suggested. Some material
may not be suitable for children.
14+ Programming contains themes or content which
may not be suitable for viewers under the age of
14. Parents are strongly cautioned to exercise
discretion in permitting viewing by pre-teens and
early teens.
18+ Intended for viewers 18 years and older and
might contain depictions of violence.

Adjusting Canadian French Rating

1 From the Child Lock menu page, press
CH+/- repeatedly to select CA FrnRateSys
item.
2 Press Enter repeatedly to select a desired
rating you want to block.
3 Press the Menu button to exit.
CANADIAN FRENCH RATING CHART
E Exempt - Exempt programming.
G General - Programming intended for audience of
all ages. Contains no violence, or the violence
content is minimal or is depicted appropriately.
8 ANS+ 8+ General - Not recommended for young
children. Programming intended for a broad
audience but contains light or occasional
violence. Adult supervision recommended.
13 ANS+ Programming may not be suitable for children
under the age of 13 - Contains either a few
violent scenes or one or more sufficiently violent
scenes to affect them. Adult supervisionstrongly
suggested.
16 ANS+ Programming may not be suitable for children
under the age of 16 - Contains frequent scenes
of violence or intense violence.
18 ANS+ Only for adult viewing.Could contain frequent
violent scenes and extreme violence.
28

Troubleshooting

Before calling for repair service, check the
following items for possible remedies to the
encountered symptoms.
Symptoms
"Ghost" or
double images
No power
No picture
Good picture but
no sound
Good sound but
poor color
Poor picture
Horizontal dotted
line
Television not
responding to
remote control
Snowy picture
and noise
No stable or not
synchronized
VGA picture
No output from
one of the
speakers
Control buttons
do not work
www.insignia-products.com
IS-LCDTV32 32-inch Color TV
Check item
• This may be caused by obstruction to
the antenna due to high rise buildings
or hills. Using a highly directional
antenna may improve the picture.
• Check that the AC power cord is
plugged into the mains socket.
• Unplug the power cord, wait for 60
seconds. Then re-insert plug into the
mains socket and turn on the unit
again.
• Check antenna connections at the rear
of the unit to see if it is properly
connected to the unit.
• Possible broadcast station trouble. Try
another channel.
• Adjust the contrast and brightness
settings.
• Check the Closed Captions control.
Some TEXT modes could block the
screen.
• Select a correct input.
• Is a non-compatible signal being
input?
• Increase the VOLUME.
• Check that the unit is not muted.
• Check that the Speaker item in
SOUND menu is set to ON.
• Adjust the contrast, color and
brightness settings.
• Sometimes, poor picture quality occurs
when having activated an S-VHS
camera or camcorder connected and
having connected another peripheral
at the same time. In this case, switch
off one of the other peripherals.
• Check whether the room is too bright.
• This may be caused by electrical
interference (e.g. hairdryer, nearby
neon lights, etc.).
• Turn off the equipment.
• Check whether the batteries are
working. Replace if necessary.
• Clean the remote control sensor lens
on the unit.
• Do not use the remote control under
strong or fluorescent lighting.
• The batteries should be inserted with
polarity (+, -) aligned.
• Check the antenna connection.
• Check if you have selected the correct
VGA mode in your PC.
• Adjust Balance in the SOUND menu.
• Unplug the power cord, wait for some
seconds. Then re-plug the power cord
and turn on the unit again.